3 Mistakes To Avoid When Sealcoating Your Driveway
Over the course of time, your driveway will end up chipping, cracking and becoming otherwise worn and faded looking. It draws away from the aesthetic appeal of your home and leaves your property looking drab. Instead of having to tear up your old driveway and go through the trouble of having a new one put in, you can simply sealcoat your existing structure. However, there are a few key mistakes you don't want to make when looking to seal your driveway. Check out some of the common ones below.
Not wearing protective gear.
Before you begin doing anything with your driveway, you need to make sure you have a good pair of work gloves. Sealants are a type of chemical, so you don't want them touching your skin at any point. The smell is also pretty strong, so you will want to purchase a mask to prevent breathing in the fumes. By making sure you have all the proper tools in place, you can prevent damaging your skin or otherwise struggling to breathe because of the fumes.
Failing to prepare the surface properly.
You need to spend ample time going through your entire driveway and making sure it is nice and clear. Get rid of twigs, leaves, grass and anything else on the surface of the driveway or sticking out through it. You should also clear along the edges of the driveway just to be safe. Once you have all the large items off the driveway, you need to take a clean broom and sweep the entire surface. All of the little pieces of dirt and dust can make it difficult for the sealant to adhere to the driveway. You can also use a hose to spray it down and a squeegee to clean it off. The choice is yours, provided you clean the driveway thoroughly.
Not applying the sealant properly.
Don't go around just spreading sealant everywhere. You should start in one corner and work in small sections. Apply the sealant thinly and evenly using a long-handled tool, such as a push broom or a paint roller, and avoid stepping on your freshly sealed driveway. It takes a lot of time and patience to make sure the sealant is evenly applied and thoroughly covering your driveway.
Make sure to allow the driveway to dry for a good 24 hours. During that time, you shouldn't drive on it. This will ensure your driveway gets the chance to set properly and ends up looking amazing at the end.
If you want professional help in sealcoating your driveway, contact companies like Norwest Construction.